house roof design

When building or repairing a summer house or cottage, many people ask a reasonable question: how to cover the roof of the house? The choice remains only with the owner of buildings and structures. However, today the characteristics are determined, according to which it is recommended to choose a material for the roof.

There are a variety of roofing options on the market, each of which gives homes a charming look. It is worth noting that the choice is very often influenced by fashion trends, but the material must always be of high quality.

Classifications of roof coverings according to various criteria

Conventionally, all roofing materials can be divided on various grounds:

1. according to external characteristics, there is a roll, sheet or piece roof;
2. according to the initial raw materials, there are organic or mineral materials;
3. depending on the type of top coating, there is a roof with a metallized or polymer film;
4. according to the variant of the binder, the material for the roof is divided into polymer, bitumen and bitumen-polymer;
5. according to the type of protective layer, the roof is scaly, coarse-grained, pulverized and fine-grained;
6. Finally, according to the type of base, there is a roof on cardboard, fiberglass, foil, fiberglass and steel.

From all this variety, you need to choose for yourself which roof is better. Therefore, first you need to decide what qualities it should have.

Important roofing requirements

All roofing materials comply with certain standards, which are prescribed in special documents (technical specifications and state standards). Any materials that do not meet the required standards are not allowed on the market and cannot be used in construction.

So, what should be the coating for the roof of the house?

• Resistant to solar UV rays;
• Resistant to temperature changes (both frost-resistant and not susceptible to heat, the coating should easily thaw and not deform when frozen);
• Tight (the roof should not let moisture through, i.e. leak);
• Resistant to external influences (atmospheric phenomena, dust, dirt, harmful gases);
• durable;
• durable.

Properties of roofing materials

Before using and buying roofing, you need to know its properties, as well as the conditions for working with it and its installation. This is the only way to achieve long-term and rational operation of the roof.

The strength, density of a particular coating are the technological properties of the material. They are very important and you should definitely pay attention to them when choosing the best to cover the roof of the house. These properties include frost resistance. For the northern regions, it should be higher, because such a roof will be constantly frozen (every winter).

If your roof is going to be exposed to intense heat, then the roof must have a property such as fire resistance.

Each version of the roofing material undergoes laboratory tests, where the following properties are determined:

• technological,
• mechanical,
• Chemical,
• Physical.

Knowing what properties the material for your roof should have, you can determine the best way to cover the roof of the house. However, you should first study all the properties of specific roofing materials.

Bet on simple installation - slate sheets

Slate is a large sheet of wavy shape. It is made exclusively from asbestos-cement mortar. This material is durable. However, its main disadvantage is excessive fragility.

The standard size of each sheet in length is 1750mm. The width of the sheet can vary between 980-1130mm. Every 150/200mm, waves rise on the surface of the slate to a height of up to 54mm.

Slate perfectly tolerates temperature extremes, which do not affect its properties in any way. That is why such a coating can last up to 40 years without repair and replacement.

The slate is very easy to install. However, it must be handled very carefully, otherwise it will break. Although sheets that are damaged are quickly replaced, this is still an extra cost.

Today, slate coating can be painted in any shade. This allows not only to improve the appearance of the roof, but also to protect it, increasing its durability.

Slate is perfect option roofs for utility rooms, such as a barn or other outbuildings. After all, this is an ideal ratio "price - service life".

What should you pay attention to if you chose how to cover the roof of the house, and the material turned out to be asbestos-cement sheets? When buying, inspect the slate:

• There should be no cracks, dents, extraneous inclusions;
• On the contrary, the edge should be smooth without any delamination.

Metal sheets - practical roofing

This type of coating can be made from:

• Galvanized steel;
• aluminum.

These sheets are very durable and practical material. Unlike slate, it is not fragile. The only difficulty in using a metal roof is its installation. Sheets are connected using special bends or folds.

The advantages of this type of roofing material are:

• Lightweight sheets;
• They can be used not only on sloping roofs, but also on roofs with a very slight slope;
• This material is durable.

Aluminum sheets will last longer than galvanized steel roofing. The fact is that aluminum is very resistant to corrosion. Therefore, such a roof can last more than 80 years.

This material also has its drawbacks:

1. During heavy rain, the house can be very noisy, all the impacts of the drops are audible;
2. The metal has good thermal conductivity. Therefore, it does not protect well from cold or heat.

Beautiful protection - metal tile

This type of roof is made on the basis of galvanized steel. Outwardly, it imitates tiles. Due to the fact that the material is treated with a special anti-corrosion compound, it can last for many years.

Many people, deciding which roof is better, choose metal tiles. After all, she:

• Easy to install;
• Differs in durability;
• Has a beautiful appearance.

Because the material is made of metal, it has exactly the same disadvantages as metal sheets.

Modern euroslate

This version of the roof is better known as Ondulin. It is made by pressing cardboard, and then impregnating it with a special bituminous impregnation.

Why, when builders choose how to cover the roof of a house, do they often choose euroslate? The answer is simple - this material will last more than 30 years. In addition to everything, it has a low cost, and it is quite easy to mount it.

The main disadvantage of Ondulin is the low strength of the material. And when it rains or hails, all the noise easily penetrates inside the house.

How to roof a house? Mastic roofing - the choice of millions

A polymer film that is already applied to the roof surface (reinforced concrete, wood, etc.) is called a mastic or self-leveling roof. A special composition is applied in a very thin layer to the surface, and when it hardens, it turns into a monolithic coating.

People who are faced with the choice of which roof is better should pay attention to the advantages of bulk material:

1. Good waterproofing, because the roof is monolithic;
2. High heat resistance (the temperature range that such a roof can withstand ranges from -40 to +100 degrees);
3. Resistant to UV rays;
4. Light weight material.

Mastic roofing can be used to repair the roof of a house. Especially if only minor damage is observed.

Which roof is better? Maybe a roll?

Such material is bitumen, which is applied to a fabric or cardboard base. The most popular roofs of this type roofing felt and ruberoid are. Recently, people who are thinking about the question of how best to cover the roof of a house choose glassine or glass isol.

All these types of roofs are frost-resistant, retain heat well, and are durable. And the method of their installation is very simple: a rolled roof is laid on a flat roof surface in several layers, connected by liquid bitumen.

Often, to improve the mechanical qualities of such a coating, it is covered with fine gravel or sand from above.

Good option - soft roof

It is made from bituminous tiles. The base of the roof (polymer fabric or fiberglass) is covered with a self-adhesive layer. This allows you to simply glue it on when installing the roof. Right place. Such styling is available to anyone, even non-professionals.

Soft roofs are very a wide range of shades. Among other things, they have high hydro, heat and sound insulation. And on top of that, soft roofing is quite inexpensive.

Type-setting roof - tested for centuries

Such material fits for a long time. After all, you have to assemble the roof from small elements. The most popular option is roof tiles (ceramic or slate). It is one of the best options both aesthetically and in terms of durability. That is why someone does not even think about the best way to cover the roof, but immediately choose a type-setting roof.

True, the tile has two significant drawbacks:

1. For its installation, you need a strong frame that can hold it;
2. This is the most expensive roofing option.

The choice of how to cover the roof of the house always remains with its owner. It is necessary to evaluate your payment options and decide which qualities of a roof are more important to you: durability, ease of installation, aesthetic qualities, or something else.

How to cover the roof in the country - this question arises for all lovers of country life in the summer, who are going to build a house or decide to replace the old roof. If earlier there was simply no large selection of materials, today a wide variety can be found on sale. roofing types,which suitable for suburban conditions, for a house that is actively used only in the summer or, periodically, all year round.

It is quite natural that every zealous owner strives to save as much as possible, taking into account the fact that once country house ik is mostly used only in summer, and is not the main place of residence of the family, then not necessarily purchase an expensive coating for its roof. Perhaps this is so. However, when planning repairs or construction works, it is necessary to weigh all the advantages and disadvantages of a particular coating, take into account the peculiarities of the location of the house, as well as some operational nuances.

To choose the right roofing material, it is necessary to provide following points, which will directly affect the performance of the roof:

• The slope angle of the slopes is important to consider due to the fact that not every coating is suitable for a flat or sloping roof with a slope of less than 10-15 degrees. In addition, the normalized consumption of roofing materials often directly depends on the slope angle of the slopes.
• Location of the house. So, if the house is built under the canopy of trees, then you should choose a coating on which fallen leaves and small branches will not linger.

In addition, this factor is also taken into account due to the fact that if the house is in the shade almost constantly, then the surface of some coatings becomes a favorable place for the formation of moss and lichen colonies. These forms of vegetation are able to completely populate the roofing, which will interfere with the normal drainage of rain and melt water, and therefore increase the likelihood of leaks in the roof.

If the building, on the contrary, is located in an open area, under the hot sun, then you should choose a material that minimally conducts heat into the house through the attic. This is especially important to provide for in cases where the roof has a slight slope, and there is no attic space. Being strongly heated by the sun's rays, some types of roofs are able to accumulate heat or quickly transfer heat to the house - it will be hot in the rooms not only during the day, but also at night.

• strength of the roofing material. Even if the cottage is used for living exclusively in the summer, it is still necessary to think about the winter half of the year. And especially if winters in the region of residence usually happen snowy - it will accumulate on the slopes a large number of snow, which will create a high load not only on truss system, but also on the coating itself. In the spring, starting to thaw, the snow layer will become even heavier. In addition, frost will appear, which can also contribute to damage to the roof.
• Environmental friendliness of the material. It is very important that during the period of operation the coating does not emit toxic or other substances harmful to human health into the cottages and the environment.
• Ease of installation - this factor is especially recommended to take into account if the arrangement of the roof will be done on its own.

• The aesthetic qualities of the material - they are important if the country house and the area around it is designed in a certain style.
• The cost of the roofing itself, its accompanying materials and component parts, which lies within the limits available to a particular owner. This is also a very important factor, so it has to be separately calculated and taken into account, especially if a strictly defined amount has been allocated for repairs or construction, and it is impossible to go beyond it.

Now, having figured out what you need to pay attention to when choosing a roofing material country house, we can proceed to a more detailed consideration of coatings.

When planning a house Special attention is given to the choice of roofing. I want it to be of high quality, durable and affordable. Worth paying attention to. A variety of roofing materials can confuse anyone. In such situations, a thorough analysis of the advantages and disadvantages of each type of roofing material related to the economy class will help to make a choice. About how much it costs to cover the roof in a country house or in a private house and what material is best to do this, we will burn in this article.

Metal tile - the main material

When the question arises of how to cover the roof of a private house, the answer is most often a metal tile. This material has received its wide distribution due to its clear advantages.

Advantages of a metal tile:

• availability, both in terms of price and availability of material in stores;
• simplicity and ease of installation;
• environmental friendliness - due to the fact that the metal tile is made of steel;
• long service life - more than 20 years;
• large selection of colors.

The disadvantages of this roofing material are:

• noisiness - during the rain, the sounds of drops hitting the roof will be clearly audible;
• windage;
• the need to additionally perform insulation and soundproofing of the roof;
• susceptibility to corrosion;
• a large residue of waste when roofing complex roofs;
• a minimum of rental drawings.

When choosing a metal tile, you need to calculate not only how much it costs to cover the roof in a private house based on the cost of material and roofing work for square meter, but also the price of additional elements. It often happens that metal tiles are sold at a discounted price, and then, when it comes to buying additional elements, they turn out to be prohibitively expensive.

The thickness of the steel and the amount of zinc contained are important indicators of the quality of the metal tile. The higher these figures, the better. Buying metal tiles from trusted manufacturers, you can protect yourself from unnecessary hassle with poor-quality material.

The cost of a metal roof depends on many factors:

• material cost ($6-13 per sq.m.);
• the cost of installation work (amounts to 50-100% of the cost of the material);
• price additional work and materials;
• design complexity.

The roof area does not depend much on the square of the house, since the building can be two- or three-story, which means that the size of the roof will depend only on the floor area and its own design features.

For more accurate cost calculation, you should use our calculator, or roof.

On average, a metal roof will cost:

• for small house(about 100 sq. m.) - close to $ 1000;
• for a medium-sized house (about 200 sq. m.) - $ 1200-2000;
• for a large house (about 300 sq. m.) - $ 2000-3000.

Soft tiles for the roof of the house

Soft tiles are often chosen for complex construction roofs.

The main advantages of this material include:

• ease of installation;
• a huge variety of colors of the material;
• minimum waste during installation;
• environmental friendliness;
• noiselessness;
• durability (more than 30 years of operation);
• minimization of risks when buying, due to the complexity of manufacturing the material and the impossibility of forging it.

The disadvantages of soft tiles are:

• frequent breakage of material due to strong wind;
• the need to perform a solid base - a common crate;
• the impossibility of building a "residential" roof.

The price of soft tiles

Considering that the cost of soft tiles is $7-17 per sq.m., and roofing work will cost $6-40 per sq.m., for a roof made of soft tiles you will need:

• for a small house (about 100 sq. m.) - $ 1000-4000;
• for a medium-sized house (about 200 sq. m.) - $ 1200-8000;
• for a large house (about 300 sq. m.) - $ 1800-12000.

This material also requires a careful approach to the selection of additional elements and the assessment of their cost.

Wavy bitumen sheets

On corrugated bituminous sheets, people who erect buildings for household purposes or simple summer houses most often stop their choice.

Among the advantages of this material are highlighted:

• low cost;
• ease of installation - the roof can be performed even without special skills;
• ease of transportation;
• noiselessness;
• the possibility of using lightweight inexpensive crates;
• unusual shades of material;
• environmental friendliness;
• long service life (at least 15 years);
• low cost of additional elements;
• market transparency - no risk of buying a fake.

Disadvantages of corrugated bitumen sheets:

• limited design solutions;
• the possibility of leaks;
• the possibility of sagging material.

The use of special nails with specific caps (20 nails per sheet) during the installation of this material will extend the life of the roof.

Cost of corrugated bitumen sheets

The cost of the material ranges from $ 9-12 per sheet, roofing with bitumen sheets costs $ 4-5. Fully roofing from corrugated bitumen sheets will approximately cost:

• for a small house (about 100 sq. m.) - $ 800;
• for a medium-sized house (about 200 sq. m.) - $ 1000;
• for a large house (about 300 sq. m.) - $ 1200.

Keramoplast

Keramoplast is a composite material created from organic raw materials and plastic granules.

The main advantages of keramoplast:

• high rigidity;
• noiselessness;
• absolute environmental friendliness.

Among the disadvantages of keramoplast, it is especially often manifested:

• poor tolerance for temperature changes;
• fragility;
• complexity of transportation.

• for a small house (about 100 sq. m.) - $ 800-1200;
• for a medium-sized house (about 200 sq. m.) - $ 1200-6000;
• for a large house (about 300 sq. m.) - $ 1500-8000.

Composite metal tile

Composite metal tile acts as a little-used material, since few people know about its existence. Its basis is a metal sheet, and the surface is made of stone granulate.

Among the advantages of this material are noted:

• a wide selection of colors and shapes of colors;
• high anti-corrosion ability;
• noiselessness;
• durability (more than 50 years of service);
• reliability.

Besides this roofing material includes all advantages of a metal tile and a soft roof.

The downside is:

• complexity of installation;
• relatively high cost of material and additional components.

The cost of such a roof is in the following price range:

• for a small house (about 100 sq. m.) - $ 7,000-20,000;
• for a medium-sized house (about 200 sq. m.) - $ 20,000-50,000;
• for a large house (about 300 sq. m.) - $ 40,000-60,000.

The analysis of the given data shows that a roof made of corrugated bituminous coatings will cost the least, but this material also has the shortest service life, while the most expensive material is composite metal tile– has the greatest durability among all materials and least of all shortcomings.

How much does a roof cost: reviews from the forum

Igor M.

I was going to reconstruct the cottage. My house is not big, only 6×9. I want to dismantle the old roof, raise the floor by a meter and install a new one from metal tiles. The roof is the simplest gable. I started asking prices. On a turnkey basis, they gave me a price of 450 UAH per m2. It's just a job without materials.

I am disappointed. It is only necessary to pay 130 UAH per m2 for the metal tile itself, and plus the rafter part, insulation, etc. It's getting expensive. But I began to ask further, they said that the maximum price is now 200 UAH per m2. I spoke with the foreman. He promised to do it for 300 m2. We calculated the materials, it turned out with the work 48,000 UAH, about $ 2,000 We agreed that we would start with the first rays of the spring sun. I put money aside, I'm waiting.

Sergey B.

I undertook to remake my parents' house a little. I did the insulation. I decided to cover the roof with metal tiles. I don't need to do anything special. I did a major overhaul of the roof two years ago, just remove the slate and replace it with a metal tile.

I did not think for a long time, I phoned the specialists who had already worked for me. They say 300 rubles ($5) per square, and we will change everything. Indeed, he brought the materials, the guys came, they did everything qualitatively. In Moscow, I would hardly have invested in such a budget, except that in Ukraine their construction services are cheaper.

Alexey K.
I live in Russia, I am from Ukraine. It so happened that in two years I had to change the roof on the houses in two different countries. First with the wife's parents, and then with their own. And you know me, confused by some price points. When I was engaged in replacing the roof on my mother-in-law's house, everything was for the first time. I thought for a long time what material to choose and how to make it. Although I am a busy person, it was still interesting. How do people make and from what. Therefore, he delved into the cost of materials and the quality of work.

The following year, he came to visit his parents. I looked at the old house and decided that it needed to be updated. I didn't have any issues with the roof. I knew exactly what and how I needed. In both cases, this is a house, approximately 200 m2, under a slate gable roof with attic. Having experience, I immediately began to look for a contractor who would do all the work on a turnkey basis.

I'm still on vacation, so I left control. I was lucky with the builders and for the first and second time I came across experts in their field who can do the job well and quickly. The roof went up very quickly. But being involuntarily engaged in construction, or rather curatorship, he compiled the so-called international price list of roofing works. We will not take materials, they are almost similar, in dollar terms.

Turnkey roof manufacturing

So straight to the point:
1. Dismantling of the old roof - 250 rubles / m2; or 10 UAH/m2.
2. Manufacturing cold roof turnkey from metal tiles, depending on the complexity with the installation of rafters, installation of battens, waterproofing, fastening of counter rails, directly to the metal tiles themselves, skates, wind slats, valleys - 1200 - 1300 rubles / m2; or 130 - 160 UAH / m2.
3. Warming - 280 rubles / m2; or 40 UAH/m2.
4. Installation of floor beams - 150 - 200 rubles / linear meter; or 35 UAH/lin.m.
5. Installation of drains, depending on the floor - 245 - 420 rubles / linear meter; or 40-55 UAH / running meter
6. Sheathing overhangs - 550 - 600 rubles / linear meter; or 70-90 UAH/rm
7. Arrangement of gables with materials for the facade, for example, siding or clapboard - 350 - 400 rubles / m2; or 60 - 70 UAH / m2.
8. Installation roof window- 3000 - 4000 rubles / piece; or 600 - 1150 UAH / piece.
9. Installation of draft walls and ceiling - 70 - 80 rubles / m2; or 35 UAH/m2.

Measurements in both cases were carried out free of charge, because subsequently, I took both the material and ordered the work itself. Although initially everyone said that the service was paid. The metal tile and related materials were delivered free of charge, for the same reason.
After analyzing the metal roof, I decided to look at the roof from different materials. List prices for installation work cold roof when installed on a turnkey basis:
bituminous tiles- 1800 - 2100 rubles / m2; or 160 - 220 UAH / m2.
Natural tiles - 1100 - 2000 rubles / m2; or 300 - 350 UAH / m2.
Roofing corrugated board - 800 - 1000 rubles / m2; or 150 - 200 UAH / m2.
Composite tiles - 1100 - 2000 rubles / m2; or 200 - 250 UAH / m2.
Euroslate, Ondulin, Aqualine - 800 - 1000 rubles / m2; or 150 - 200 UAH / m2.
Tariffs for insulation, installation of a drainage system and other works do not differ from those used when installing a roof made of metal.

Thus, we can conclude that the choice of roofing material directly depends on individual preferences, phrases, purpose and design features of the building, so it is impossible to give an unambiguous answer to the question of what is better and cheaper to cover the roof. Each material has its pros and cons, so you need to do individual choice based on the above data.

Comments:

Facebook (X)

Regular (25)

1. Albert

   Guys, by and large, what's the point in asking in the comments how much work on your roof will cost? Ask a question either to several contractors at once and compare, or if you make an estimate, you can contact the supplier directly. Serious companies will calculate everything for you for free, at the same time you will communicate with the manager more, maybe you will also get a discount for yourself. I took a metal tile in the Grandline for my double slope (gazebo + canopy). Everything was calculated, brought, neatly packaged, the third year I do not know the troubles. Who needs it, site grandline.ru

2. CEM
3. Dmitry

   tell me the approximate cost of the work. Hangar in the Moscow region. Roof sandwich panel. The work is to unwind. lift the top sheet from the sandwich panel into a brazen one. glue the joints with sealant tape. spin back. Our building materials. The total length of the joints is 400 meters. Some part of the roof is generally not twisted, respectively, we twist about 50 meters, thanks in advance.

4. Vladimir

   how much does it cost to cover a metal roof soft roof– 183 sq.m.

5. George

   If you can calculate the approximate cost of work with your materials:
   1. Remove the galvanized iron roof statue.
   2. Insulate with 150 mm basalt (or other material) slabs. with hydro and vapor barrier.
   3. Cover the roof with metal tiles.
   4. Insulate the pediments over the lining (offer an option for insulation).
   The roof is gable, area 120 sq. m.. Gables of 18 square meters. m. With Windows Of 1.8 Sq. m.
   I can send a drawing of the roof and gables to your E-mail.
   Best regards, Georgiy.

In the days of the Soviet Union, there were no difficulties when choosing roofing materials. In all building stores it was possible to purchase only slate and roofing material. Today the situation has changed, and a potential client is offered a lot of options. The solution to the question of how to properly cover the roof depends on the choice of roofing material.

In this article

How to choose a roof

Roofing materials are subject to fairly stringent requirements. They must meet the following criteria:

• durability;
• safety, first of all, for health;
• strength;
• attractive appearance;
• the ability to clearly repeat the shape of the roof;

The main types of roof coverings: slate, metal profile, metal tile, ondulin. There are also more exotic species (tiles, keramoplast), but we need to find out how to cover the roof of the house inexpensively and with the highest quality.

Slate

This roofing material has been used to cover roofs for decades. For such a long period of operation, all the positive and negative sides were identified.

Flaws

Its main disadvantages include the following qualities:

• toxicity;
• fragility;
• moss may appear on the slate in shaded areas.

Advantages

Nevertheless, this roofing material is still sold in many hardware stores. So, there are also positive qualities that are in demand by the consumer:

• affordable price;
• resistance to high temperatures;
• ease of installation;
• flat sheets of slate can be used not only for roofing, but also for the construction of some garden and outbuildings.

Sometimes sales consultants claim "special" strength of the material. Who at least once in childhood climbed onto the roof of a house covered with slate will respond to such a statement with a smile. Upon closer examination, it turns out that, other things being equal, the material compares favorably with its counterparts only in price. For a residential private house, aesthetics is an important factor, and slate cannot boast of this. Therefore, this roofing material - a good option for a small country house or outbuildings. It is better to refrain from covering the roof of a private house with slate.

metal tile

One of the most common roofing materials. The metal tile is a material which is based on the metals protected polymer coated, has an aesthetic appearance.

Advantages

The use of metal tiles is quite explainable by its positive characteristics:

• attractive appearance;
• wide color palette;
• work with metal tiles does not require special skills;
• durability;

Many manufacturers and specialized organizations cite the low price of the material as an additional advantage. But for some reason, they do not take into account at all that related and consumable materials also cost money. One of the main shortcomings is the predisposition of the material to condensate; to neutralize it, you have to purchase a special membrane, which also costs money.

Flaws

Other disadvantages include:

• low sound insulation;
• when working, a large amount of surplus remains (about 30%);
• on a metal tile covered with a small layer of polymeric materials, corrosion may appear.

In principle, it cannot be said that the negative aspects are of critical importance. Therefore, when deciding how to cover the roof, and most importantly, with what, metal tiles should not be discounted. This is one of the most common options. The price confuses a little, but in general it is quite a worthy option.

Ondulin

The name of this roofing material, which is called "on hearing", but what it is, hardly anyone will tell without preparation. Ondulin is a soft roofing material developed in France. In appearance, it is similar to slate, and for its manufacture were used: bitumen, cellulose fibers, mineral fillers and special resins. The ondulin canvas is impregnated twice with bituminous compounds during the production process, and at the final stage it is covered with acrylic paints.

Advantages

In favor of choosing such a roofing material, the following circumstances speak:

• light weight, which facilitates transportation and installation;
• ondulin is chemically resistant active substances, sunlight, temperature difference.
• roofing material does not harm the environment and human health.
• mold and fungal diseases do not appear on ondulin.

Hardware stores and firms seem to be advertising "affordability". A very controversial statement. Price tags for ondulin start at 300 rubles, excluding related accessories.

Flaws

On the negative side, ondulin is characterized by:

• the material is susceptible to mechanical stress; after completion of roofing work, it is better not to climb onto the roof;
• joints between canvases require special attention.
• some types of ondulin fade with prolonged exposure to sunlight (partial solution to use brown or red material).

For use somewhere in France or in Sochi - a fairly decent roofing material. In more severe climates, where tons of snow are sometimes hauled away, the inability to withstand significant loads is suggestive.

Another controversial point is the combustibility of the material. Of course, any owner will say that his stove / boiler / chimney is installed taking into account all fire safety requirements. But no one will give the same guarantee about nearby houses. Therefore, thinking about the best way to cover the roof, it is necessary to consider ondulin as a roofing material for a private one with caution and taking into account the climatic conditions of the region.

Metal profile (Professional)

The metal profile is produced not only for roofing, there are also options such as wall (similar to siding) and load-bearing (fences, outbuildings). Roofing corrugated board has a higher corrugation, which increases its strength.

In addition, some manufacturers are experimenting with rolling mill rolls to achieve great looks. In some cases, corrugated board is not inferior in design and metal tiles.

Advantages

The metal profile occupies one of the top lines in the rating of roofing materials due to its positive qualities:

• resistance to precipitation and climatic conditions;
• long service life;
• resistance to sudden changes in temperature;
• does not respond to direct exposure to sunlight;
• safe for the health of the inhabitants of the house;
• a wide range of colors.

Pricing policy is, apparently, a disease of all sellers and managers. To any question, the standard is heard: profitable, affordable, discounts up to 70%. It seems that the outlet operates almost at a loss. In fact, no entrepreneur has ever been seen as altruistic. However, this applies to all building materials and not only.

Flaws

In addition to the price, the metal profile has other disadvantages:

• soundproofing leaves much to be desired;
• condensation may occur (solved by the membrane);
• products of some firms burn out in the sun.

There are disadvantages, but performance characteristics do not affect much. The material is equally in demand by owners of private houses, solid country cottages and small dachas . The remains of corrugated board can be used in the construction of outbuildings.

Summarizing

When analyzing specifications materials used for roofing, it turns out that almost all of them have an attractive appearance (with the exception of slate), serve long time, do not require special skills during installation, you can choose any color scheme. Therefore, in order for the roof to stand for a long time, it is necessary to choose the material for it carefully, considering all the pros and cons.

The main parameter influencing the initial choice is how much this or that roof covering costs. From this point of view, slate wins over all the listed roofing materials, but this is its only advantage.

Metal profiles and metal tiles are approximately in the same price category. However, corrugated board is superior to its counterpart in terms of practicality. Working with a metal profile, it is easier to calculate required amount material. It is believed that corrugated board can withstand more severe loads than metal tiles. Their negative qualities almost completely coincide.

In comparison with ondulin, a metal profile can be purchased at a better price. Decking is more reliable than ondulin in terms of fire safety, and is more resistant to mechanical damage. In defense of ondulin, we can say that, unlike corrugated board and metal tiles, it has a much smaller mass and is considered more aesthetic.

Before making a decision, consider carefully available materials for roofing, their advantages and disadvantages, and only then choose the best option.

Of course, there are a lot of roof coverings offered today, and the final choice lies entirely with the owner of the house or cottage. But considering one or another option, evaluate the material for the roof from the following aspects: resistance to stress and damage, service life, design and price. The metal profile, by the way, fully meets these requirements, and the roof covered with it will stand for more than a dozen years.

As a roof covering, natural or artificial materials can be used.

How to choose a roof for a house?

Among natural materials, you can choose slate, wood, artificial products include bituminous coatings, sheet metal, plastic polymers, keramoplasts. What is the best way to cover the roof of a house? The choice of materials depends on the type and style of the roof. Each of the existing building materials for the roof has its advantages and disadvantages, everyone can add their own features to the design of the house. So which one is right for you?

There are many factors to consider when choosing a roof, including:

• Life time.
• Resistant to fires and natural disasters.
• Material weight.
• Roof structure for roofing.
• The design of the roof complements the style of the house.
• Are the materials environmentally friendly and recyclable?
• material possibilities.

How to cover the roof of the house? Some types of roofing are more suitable for a home. Factors such as the slope of the roof and the strength of the frame limit the choice. In areas prone to fires or hurricanes, it is worth using materials with high fire resistance and good wind resistance. During the installation of many types of roofing, resistance to the required characteristics can be improved.

bituminous tiles

Bituminous shingles are the most popular type of roofing for houses. It is made from organic fibers, which improve thermal insulation, or fiberglass, which increases resistance to fire and moisture. The filler is impregnated with bitumen and coated with mineral granules. Distinctive features are medium strength, resistance to moisture and sunlight, average weight. The bituminous tile is issued for various architectural styles, has a variety of colors and shapes. This plays an important role in the choice of roofing material for historical or stylized houses, but with a weak roof structure. The material is well suited for both flat and steep roof slopes. How to cover the roof wooden house? Artificial roofing materials come in handy in these situations because they can mimic slate or wood shingles to potentially reduce maintenance costs.

Metal

More expensive metal roofing lasts longer and is more wind resistant. It is made in sheets, in the form of corrugated board, known as seam roofing, or in the form of tiles made of steel, aluminum, copper or zinc alloy. Steel roofs are often zinc coated or painted. Copper ones acquire a protective green coating over time. What material to cover the roof of the house? Metal roofs absorb less heat, are very durable and light in weight. Such roofs are available for low or steep pitched roofs. They are fire and weather resistant. Metal roofs do not retain water and snow, unlike other types of roofing. Therefore, the use of metal on steep pitched roofs will require the installation of gutters and drains.

Polymer roofs

Durable synthetic roofs resemble either wooden shingles or slate. The materials for their production are cast high-tech polymer plastics. In appearance, these roofs are similar to slate. Polymer materials have a long service life and do not require additional care. What is the best way to cover the roof of a house? Polymer roofs are used on roofs ranging from moderate slope to steep pitched roofs. Moreover, the materials have their own light or moderate weight. Roofs made of polymer materials are fireproof and perfectly tolerate bad weather and solar exposure.

Roof tiles

Fragile and heavy clay tiles are very for a long time. The manufacturing material is natural clay which is fired in a kiln. Tiles were traditionally used by Italian and Spanish builders. Its appearance resembles shingles or slate. What can cover the roof of the house? Characteristic properties for this material are long service life, fire resistance, but high fragility, significant weight. Applies to durable structures roofs from moderate to steep slope.

concrete roof tiles

Concrete tiles are cheaper than clay tiles, but the rest of the features are the same. It is made from a mixture of Portland cement and sand. Appearance roof tiles are reminiscent of traditional clay tiles, wood shingles or slate. The color may be applied to the surface, often the pigment is added to the mixture prior to molding. How to cover the roof of the house? Made from natural materials the roof has a long service life, but is usually brittle, heavy and requires reinforced roof framing. Can be used for medium and steep roof slopes.

Slate

Slate is one of the oldest roofing materials, which is characterized by fragility and high weight, but high resistance to fire and bad weather, excellent consumer properties. Slate is made from natural slate. This natural material usually dark gray in color, aesthetics are not its strong point. How to cover the roof of the house? Slate is used only on sloping reinforced roof structures. Professional styling recommended. Advantages of slate - profitability, reliability, durability.

wooden shingles

Wood shingles and other wood roofing materials, typically made from cypress, mahogany, pine, and cedar, have low fire resistance and require constant rotting treatment. it a good choice for steep sloped roofs. What is the best way to cover the roof of a wooden house? Wooden roofs are made from various shapes plates:

• shingles - thin plates from a whole trunk of alder, spruce, aspen;
• shingles - sawn boards with a lock connection;
• shindels - tiles of irregular shape;
• plowshares - tiles of irregular curved shape with a carved edge;
• tesy - edged boards from coniferous breeds;
• chips - boards are shorter than shingles.

Creates a stylish natural look. Such materials are characterized by a short service life, the need for periodic maintenance and processing, average weight, weather resistance, and high aesthetic values. Used on moderate to steep pitched roofs. For steep slopes, wooden roofing materials are suitable because they do not retain moisture. This version of the roof is quite practical.

Arguments when choosing

Steeper pitched roofs are visually more visible and have more of an impact on design than flat roofs. When choosing visually appealing and interesting roofing materials that will complement and enhance the design of a home, slope must be taken into account. How to cover the roof of the house?

The use of energy efficient roofing materials offers financial and environmental benefits. This greatly helps to reduce heating or cooling costs. When choosing a roof, one should not be greedy - the comfort in the house depends on the durability and reliability of the roof. The financial component is not the least important argument. It is necessary to weigh your options and compare them with the roofing materials available on the market. They must:

• Suitable for the type of climate you live in. This refers to temperature changes, rainfall, the likelihood of strong hurricanes - the roof must withstand natural disasters.
• Respond to your ideas about aesthetics.
• Respond to the angle of the roof.